diamond milling bits

Vacuum Brazing Diamond Direct Milling Cutter Bit  is used for quartz table splicing, seamless stone splicing, stone trimming tools.

The handle diameter of this product is 6.35mm, which is suitable for seaming machine and trimming machine. During use, the two plates need to be leveled and the gap should be controlled between 4-5mm; The feed speed shall be uniform, and the machine shall not stop when moving forward, or it will be offset. It is commonly used for splicing and trimming quartz stone, marble, sintered stone and artificial stone countertop.

Product Parameter

Product Specifications: 6.35mm

Scope of use:Marble and quartz table joints and trimming

Matters needing attention:
* 6.35 Handles for Seam Machine and Edging Machine;
* The two plates should be leveled and the clearance should be controlled between 4 and 5 mm.;
* Feed the knife at a uniform speed, the machine must not stop when advancing, otherwise it will be offset;

For more usage, please watch our tiktok video

Clibeanna Te: diamond milling bits